Small Front End 3 Ton Wheel Loader MCL940 ZL940
1. Products Description
MCLLROY wheel loader is wildly used in construction, agriculture
,garden,etc. And we are experiencing in making high quality
efficiency productivity.Strong power and chassis help to muddy road
condition,flexible turning is suitable for small space ,excellent
unloading height helpful for loading.
For the axle of this loader, we use cast steel small axle housing.
There are iron axle and Isuzu axle on the market. The axles play a
key role in loader working and walking. Especially under severe
working conditions, the internal forces of the axles is large. A
good axle allows users to drive safely and work with confidence.
2. Specification
| MODEL | MCL 940 |
| ENGINE | Engine Model | Yun Nei 4102 Supercharged |
| RPM | 2400 |
| Rated Power | 76 kW |
| Emissions | EU Stage II |
| WEIGHTS | Operating Weight | 6100 kg |
| Rated Load | 2800 kg |
| BUCKETS | Bucket Capacities | 1.2 m³ |
| TRANSMISSION | Max. Travel Speed | 28 km/h |
| Gear Box | CVT
280 torque converter |
| Alex | Large hub |
| Axle Base | 2560 mm |
| Brake | Air Brake |
| HYDRAULIC SYSTEM | Hydraulic Cycle time - lift | ≤ 6 s |
| DIMENSIONS(APPROXIMATE) | Min. Ground Clearance | 400 mm |
| Wheel Base | 1640 mm |
| Reach at Max.Dump Height | 3600 mm |
| Dump Reach | ≤ 650 mm |
| Overall Length - With Bucket | 6240 mm |
| Overall Width | 2040 mm |
| Overall Height | 2830 mm |
| OPERATING SPECIFICATIONS | Tyre Size | 1670-24 |
| Breakout Force | 52 KN |
| Joystick | Machanical |
| Min. turning radius | ≤ 6200 mm |
| STANDARD EQUIPMENT | Hour meter | Yes |
| Tool Box | Yes |
| Dual Hight&Low Speed Handle | Yes |
| OPTIONAL EQUIPMENT | Air Conditioning/heater | Option |
| Quick Change | Option |
| Multifunctional Attachment | Option |
| Hydraulic Pilot | Option |
3. Details and Advantages
The main components of the loader are used brand-name
manufacturer's products, interchangeability of good, reliable,
well-resourced parts.
1) Tire:A variety of patterns to adapt to different perorations
,solid tires available.
2) Frame:Strong hinge joint.
3) Cab:
I. Electronic oil level indicator.
II. Comfortable seat with safety belt.
III. Intelligent instrument.
IV. Pilot valve hydraulic operation.
4) Wide-opening hood for easier servicing & maintenance of engine.
5) MCLLROY design engine cover,automatic power-off electronic
flame-out ,no knife.
4.Production lines:
A complete production process mainly includes: material
procurement-steel plate cutting-welding-spray painting
-drying-assembly-inspection
Assembly:
Our factory arrange seven steps for assembly. There are over a
thousand parts in a loader. I will talk about assembly of major
components.
The second step is connecting engine and gearbox, then the third
step must be putting them onto the frame.
Put engine on the frame, connect the priority valve, install
radiator and water tank;
Add hydraulic transmission oil to the gearbox (add gear oil for
mechanical transmission), install the hydraulic transmission oil
radiator and pipeline, install the hydraulic oil radiator (the
pipeline does not need to be connected), connect the brake caliper
pipeline, brake pipeline, connect main reduction (differential)
drive shaft.
There are quite so many pipelines here, this step could use many
screws and clamps.
In this step, first of all, we must pay attention to the four feet
of the frame where the engine is fixed, they have to be level,
otherwise, the force is uneven, and there is a risk of cracking in
the engine and gearbox housing; and the connection point of the
radiator must be fixed with sealant; and then see if the clamp is
tight; whether the screws of the transmission shaft are tightened.
2-3 workers will be in charge of this step.
Similar Model:
Cat 903D/906M/907M/908M
XCMG LW156/LW160/LW180/LW186/LW200
Liugong 816C
SDLG LG916 LG918 L918
